saw resonator R39001 part no. R39001 rev. date 2006-09-13 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns6101-as01 1/6 1.20.15 0.60.15 2.080.15 5.000.15 5.000.15 1.270.05 1 4 3 8 8 77 6 3 2 1 6 5 5 4 2 1.350.15 features z 1-port resonator z quartz frequency stabilization z for transmitters or local oscillators package dimension ? s5050 package dimension ? to-39 pin configuration 2 input 6 output 1, 3, 4, 5, 7, 8 ground pin configuration 1 input 2 output 3 case ground
saw resonator R39001 part no. R39001 rev. date 2006-09-13 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns6101-as01 2/6 package dimension ? f-11 marking configuration itf 1) 39001 2) 1) manufacturer name 2) marking number * ink or laser marking available * front 4 digits for s5050 maximum ratings parameter unit minimum typical maximum operating temperature range c -4 25 85 storage temperature range c -45 - 85 power handling capability dbm - 0 - electrostatics sensitive device ( esd ) pin configuration 1 input 4 output 2, 3 case ground
saw resonator R39001 part no. R39001 rev. date 2006-09-13 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns6101-as01 3/6 input 50 output 50 electrical specification f r = 390.000mhz terminating source impedance : 50 and matching network terminating load impedance : 50 and matching network notes : 1) all specifications are based on the matching schematic shown below 2) all specifications are measured by agilent network an alyzer and full 2 port calibration at room temperature matching schematic ( actual matching values may vary due to pcb layout and parasitics ) minimum typical maximum resonance frequency ( f r ) mhz 389.900 390.000 390.100 insertion loss db - 1.5 2.2 50 ohm loaded q unloaded q 2,000 13,900 trun-over temperature c 10 25 40 temperature coefficient of frequency ppm/c 2 - -0.032 -
saw resonator R39001 part no. R39001 rev. date 2006-09-13 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns6101-as01 4/6 frequency response
saw resonator R39001 part no. R39001 rev. date 2006-09-13 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns6101-as01 5/6 packing specification 1. reeling quantity : 1000 pcs / reel 2. taping structure : the tape shall be wound ar ound the reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel top cover tape carrier tape end start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw resonator R39001 part no. R39001 rev. date 2006-09-13 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns6101-as01 6/6 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 5.50 0.1 b 5.50 0.1 c 7.25 0.1 d 1.95 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|